供应商：自营(DL0001)

说明：The KSZ8862M is 2-port switch with fiber support, available in 8-/16-bit and 32-bit bus designs.The KSZ8862M is an industry first, fully managed, 2-port switch. It is based on a proven, 4th generation, integrated Layer-2 switch, compliant with IEEE 802.3u standards. For industrial applications, the KSZ8862M can run in half-duplex mode regardless of the application. In fiber mode, port 1 can be configurable to either 100BASE-FX or 100BASE-SX/10BASE-FL. The LED driver and post amplifier are also included for

供应商：自营(DL0001)

说明：Microchip's LAN7850 is a USB High Speed or HSIC to 10/100/1000 Gigabit Ethernet bridge providing an ultra high-performance and cost-effective USB to Ethernet connectivity solution. The LAN7850 contains an integrated 10/100/1000 Gigabit Ethernet PHY, USB PHY, Hi-Speed USB 2.0 device controller, 10/100/1000 Gigabit Ethernet MAC, Integrated OTP, EEPROM controller. The device supports 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet and implements Control, Interrupt, Bulk-in and Bulk-out USB endpoints. The Ethernet

供应商：自营(DL0001)

说明：The KSZ8061 is a family of single-chip 10Base-T/100Base-TX Ethernet physical layer transceivers for transmission and reception of data over unshielded twisted pair (UTP) cable. ?The KSZ8061 features Quiet-WIRE?internal filtering to reduce line emissions. ?It is ideal for applications, such as automotive or industrial networks, where stringent radiated emission limits need to be met. ?Quiet-WIRE can use low-cost unshielded cable, where previously only shielded cable solutions were possible. ?The KSZ8061 also

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The Microchip LAN8810/LAN8810i is a low-power 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet physical layer (PHY) transceiver with variable I/O voltage that is fully compliant with the IEEE 802.3 and 802.3ab standards.The LAN8810/LAN8810i can be configured to communicate with an Ethernet MAC via the standard MII (IEEE 802.3u)/GMII(IEEE 802.3z) interfaces. It contains a full-duplex transceiver for 1000Mbps operation on four pairs of category 5 or better balanced twisted pair cable. Per IEEE 802.3-2005 stand

供应商：自营(DL0001)

说明：Microchip's LAN9303M/LAN9303Mi is a high-performance, small-footprint, full-featured 3-port managed Ethernet switches. Both devices are application-optimized for consumer and embedded electronics designs which have a rapid development cycle and require low-cost switching functionality, flexibility and ease of integration.Featuring the industry's smallest form factor 3-port switch, the LAN9303M/9303Mi supports compact PCB designs and single dual (LAN9303M) MII/RMII/Turbo MII (Media Independent, Reduced Media

供应商：自营(DL0001)

说明：Microchip's LAN8741A/LAN8741Ai?are the latest generation of low-power, 10/100 Fast Ethernet PHYs featuring Energy Efficient Ethernet (IEEE 802.3az) as well as system sleep modes for improved power savings. The LAN8741A/LAN8741Ai feature a deterministic loop back delay, assuring real-time system performance. These devices?are available in both commercial (0° to 70°C) and industrial (-40° to 85°C) temperature ranges. The LAN8741A/LAN8740Ai?are well-suited for Consumer, Embedded and Industrial applications. Ad

供应商：自营(DL0001)

说明：The KSZ9031 is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physical-layer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable.The KSZ9031MNX offers the industry-standard GMII/MII (Gigabit Media Independent Interface/Media Independent Interface) for connection to GMII/MII MACs?in Gigabit Ethernet processors and switches for data transfer at 1000Mbps or 10/100Mbps.?The KSZ9031RNX provides the reduced gigabit media independ

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：When configuring a network, the maximum number of nodes and the maximum cable length are limited by the electric capacity of the transceiver. In this case, the network is expanded by a piece of equipment called a "HUB" or "repeater". It may be necessary to have a converter between coax, T/P and the fiber cable. It is easy to design a HUB or repeater because the TMC2005 has various features for expanding such a network.It can connect with HYC9088, RS485 transceiver, HYC5000/4000/2000 and TTL interface for op