供应商：自营(DL0001)

说明：TC622 and TC624 are programmable solid state temperature sensors designed to replace mechanical switches in sensing and control applications. Both devices integrate the temperature sensor with a voltage reference and all required detector circuitry. The desired temperature set point is set by the user with a single external resistor. Ambient temperature is sensed and compared to the programmed setpoint. The OUT and OUT outputs are driven to their active state when the measured temperature exceeds the progr

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The EMC1402 is a high accuracy, low cost, System Management Bus (SMBus) temperature sensor. Advanced features such as Resistance Error Correction (REC), Beta Compensation (to support CPU diodes requiring the BJT/transistor model including 45nm, 65nm and 90nm processors) and automatic diode type detection combine to provide a robust solution for complex environmental monitoring applications.Each device provides ±1° accuracy for external diode temperatures and ±2°C accuracy for the internal diode temperature.

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：具有27 个 I2C/SMBus 地址、采用业界通用 LM75 外形尺寸和引脚排列的汽车类温度传感器 8-VSSOP -40 to 125

供应商：自营(DL0001)

说明：10mV/C 汽车类 1.5C 模拟温度传感器 5-SC70 -40 to 150

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：具有 19.5mV/℃ 增益的 ±2.0℃ 模拟输出温度传感器 5-SC70 -10 to 125

供应商：自营(DL0001)

说明：具有 N 因数、滤波功能和串联电阻校正的汽车类 1.7V 远程和本地温度传感器 8-WSON -40 to 125

供应商：自营(DL0001)

说明：Linear Active Thermistor ICs are sensors whose output voltage is directly proportional to measured temperature. The MCP9701A can accurately measure temperature from -40C to +125C. The output of the MCP9701A is calibrated to a slope of 19.53mV/°C and has a DC offset of 400mV. The offset allows reading negative temperatures without the need for a negative supply. The MCP9700A is packaged in space saving 5-pin SC-70, and 3-ld TO-92 packages.

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：TC622 and TC624 are programmable solid state temperature sensors designed to replace mechanical switches in sensing and control applications. Both devices integrate the temperature sensor with a voltage reference and all required detector circuitry. The desired temperature set point is set by the user with a single external resistor. Ambient temperature is sensed and compared to the programmed setpoint. The OUT and OUT outputs are driven to their active state when the measured temperature exceeds the progr

供应商：自营(DL0001)

说明：