供应商：自营(DL0001)

说明：Microchip's USB4640 is the world's first Hi-Speed Inter-Chip (HSIC) enabled USB 2.0 hub and Flash media card reader combo solution. The 480Mbps, 2-pin HSIC 1.O-compliant upstream port provides an ultra-fast interface between an HSIC-enabled host and today's most popular Flash media cards as well as a versatile, cost-effective and power-efficient USB 2.0 hub controller with two downstream ports for Hi-Speed/Full-Speed/Low-Speed USB port expansion. HSIC's digital interconnect bus bypasses the traditional USB

供应商：自营(DL0001)

说明：UART、I2C 和 IrDA 串行端口转 USB 桥接器 32-VQFN -40 to 85

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：Microchip’s USB5744 SmartHub IC?is a 4 port, SuperSpeed (SS)/Hi-Speed (HS), low power, low pin count configurable and fully compliant with the USB 3.1 Gen 1?specification. The USB5744 also supports Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.The USB5744 is in a 0.4mm pitch, 56 pin QFN.? It

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：Microchip’s USB5806C SmartHub is a 6 port, SuperSpeed (SS), low power, configurable USB3.1 Gen1 hub ?and fully compliant with USB-IF's USB 3.1 Gen1?specification (TID1594). This supports the latest ECNs for USB-IF logo compliance for the new USB Type-C industry initiative.? The USB5806C also supports Hi-Speed (HS),?Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbp

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The MCP2221A is a USB-to-UART/I2C serial converter which enables USB connectivity in applications that have a UART and I2C interfaces.? The device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. The MCP2221A also has four GP pins providing miscellaneous functionalities (GPIO, USBCFG, SSPND, Clock Output, ADC, DAC, interrupt detector).The MCP2221A is identical to the MCP2221 in all aspects except for the maximum supported baud rate of the