供应商：自营(DL0001)

说明：The Microchip USB7052N SmartHub IC is a low-power, OEM configurable, USB 3.2 Gen 1 hub controller with?4 downstream ports and advanced features for embedded USB applications. The USB7052N is fully compliant with the Universal Serial Bus Revision 3.2 Specification and USB 2.0 Link Power Management Addendum. The USB7052N supports 5 Gbps Super-Speed (SS), 480 Mbps Hi-Speed (HS), 12 Mbps Full-Speed (FS), and 1.5 Mbps Low-Speed (LS) USB downstream devices on all enabled downstream ports.A SmartHub IC is defined

供应商：自营(DL0001)

说明：The MCP2221A is a USB-to-UART/I2C serial converter which enables USB connectivity in applications that have a UART and I2C interfaces.? The device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. The MCP2221A also has four GP pins providing miscellaneous functionalities (GPIO, USBCFG, SSPND, Clock Output, ADC, DAC, interrupt detector).The MCP2221A is identical to the MCP2221 in all aspects except for the maximum supported baud rate of the

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：USB TYPE-C 10Gbps 多协议双向线性转接驱动器 40-WQFN 0 to 70

供应商：自营(DL0001)

说明：两端口 SuperSpeed 5.0Gbps USB 3.0 集线器

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：Microchip’s USB5806C SmartHub is a 6 port, SuperSpeed (SS), low power, configurable USB3.1 Gen1 hub ?and fully compliant with USB-IF's USB 3.1 Gen1?specification (TID1594). This supports the latest ECNs for USB-IF logo compliance for the new USB Type-C industry initiative.? The USB5806C also supports Hi-Speed (HS),?Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbp

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：具有 Vbus 过压、过流保护和四通道 ESD 钳位的 USB OTG 配套器件 12-DSBGA -40 to 85

供应商：自营(DL0001)

说明：具有电池短路和接地短路保护功能的汽车类 USB 2.0 接口保护 16-SSOP -40 to 125

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The MCP2221A is a USB-to-UART/I2C serial converter which enables USB connectivity in applications that have a UART and I2C interfaces.? The device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. The MCP2221A also has four GP pins providing miscellaneous functionalities (GPIO, USBCFG, SSPND, Clock Output, ADC, DAC, interrupt detector).The MCP2221A is identical to the MCP2221 in all aspects except for the maximum supported baud rate of the