供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The MIC4833 is a low noise dual electroluminescent (EL) panel driver used in backlighting applications. The MIC4833 converts a low DC voltage to a high DC voltage using a boost converter and then alternates the high DC voltage across the EL panels using an H-bridge. The MIC4833 incorporates internal wave-shaping circuitry specifically designed to reduce audible noise emitted by EL panels. The two EL panels may be dimmed by applying a PWM signal to the device. The MIC4833 drives two outputs from a single ind

供应商：自营(DL0001)

说明：DLP 0.23 高清 DMD 54-CLGA

供应商：自营(DL0001)

说明：HV853 is a high voltage, low noise EL (electroluminescent) lamp driver. It is the low noise version of the HV852 with improved EMI performance, operating over an input voltage range of 3.2V to 5.0V. It is designed to drive EL lamps of up to 1.5in2, with capacitive values up to 5.3nF. The HV853 converts a low voltage DC input to a high voltage AC output across an EL lamp. A nominal regulated output voltage of ±80V is applied to the EL lamp. It uses a charge pump scheme to boost the input voltage eliminating

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：DLP 0.2 WVGA DMD 40-CLGA

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：The HV857L is a low noise, high voltage driver?designed for driving Electroluminescent (EL) lamps of up to five?square inches. It is the low noise version of the EL lamp driver?HV857. The input supply voltage range is from 1.8V to 5.0V. The?device uses a single inductor and a minimum number of passive?components. The nominal regulated output voltage that is applied?to the EL lamp is ±95V. The chip can be enabled/disabled by?connecting the resistor on RSW-Osc to VDD/ground.?The HV857L has two internal oscill

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：

供应商：自营(DL0001)

说明：